
Automatic shutter control does more than respond to sunlight. It adjusts shading based on outdoor and indoor temperatures, light intensity, and occupancy. Its goal is to keep the room temperature within a comfortable range whenever possible, while taking the needs of the people using the space into account.
The primary goal of ASC (Automatic Shutter Controller) is to help maintain the indoor temperature within a configured range. The default target range is 20–25 °C, but both limits can be adjusted.
The controller continuously evaluates the indoor temperature, compares it with the outdoor temperature, and considers the current light intensity. Based on these conditions, it selects the shutter position configured for the corresponding operating state.
The controller does not rely on a single fixed set of rules. Each operating state can have its own shutter position, allowing the automation to be adapted to the room's characteristics and the occupants' preferences.
The system distinguishes between three indoor temperature conditions: below the configured minimum, within the target range, and above the configured maximum.
Within each temperature range, it considers whether the outdoor temperature is higher or lower than the indoor temperature, distinguishes three light intensity levels, and applies different settings depending on whether someone is present.
This results in 36 operating states. Each state can be assigned an individual shutter position between 0% and 100% using the custom HTML configuration interface integrated into Domoticz.
For rooms with different orientations, using separate ASC controller instances is recommended. For example, an east-facing bedroom, a south-facing living room, and a west-facing terrace can operate with different control settings. A single controller can manage multiple shutters and use readings from multiple sensors.
ASC supports different hardware configurations. Not every type of sensor needs to be installed.
One of ASC's key capabilities is occupancy-aware control. When nobody is home, the shutters can be configured to prioritize maintaining indoor temperature. When someone is present, different positions can be applied, for example to allow more natural daylight into the room.
For presence detection, ASC can use our open-source OpenWrt Presence module. It detects occupancy through Wi-Fi connections and network availability, and supports multiple presence groups and access points.
OpenWrt Presence – Source Code and Installation on GitHub
For outdoor shading systems, preventing damage caused by strong winds is especially important. ASC can use locally measured wind speed or Open-Meteo forecast data and trigger a protective closing action when the configured threshold is exceeded.
Vibration detection is primarily designed to help protect roller shades and other wind-sensitive shading structures. When a dedicated sensor detects movement, the controller can initiate a closing action and maintain the protective state for a configured period.
The safest position may differ depending on the type of shading system. The mechanical design, motor direction, and required protective position must be checked during installation.
Local operation can continue without an internet connection when the necessary sensor data is available. However, retrieving Open-Meteo weather forecasts requires internet access.
During colder weather, using natural sunlight can help reduce heating demand. In summer, blocking strong sunshine can limit indoor overheating. When someone is present, the controller can allow more daylight depending on the configured preferences.
East-facing rooms receive stronger sunlight in the morning, while west-facing rooms are exposed mainly in the afternoon. Separate ASC instances, optionally using different light sensors, allow independent control for rooms with different orientations.
ASC can also control terrace shading without an indoor temperature sensor. In this configuration, it assumes an indoor temperature of 22 °C and adjusts the shading based on weather conditions and light intensity. Additional wind and vibration sensors can provide further protection.
No. A single ASC instance can manage multiple shutters using the same control settings. However, separate controller instances are recommended for rooms with different orientations or usage requirements.
The controller assumes an indoor temperature of 22 °C. Automatic operation remains available, but it cannot respond to changes in the actual room temperature.
No. ASC works without presence detection, but enabling it allows separate control preferences when someone is at home.
Actual savings depend on insulation, window area, building orientation, and the heating and cooling systems in use. Automatic shading can reduce cooling demand in summer and help take advantage of solar heat gains during colder months.
ASC is designed for the open-source Domoticz home automation platform. The following resources can help you select suitable devices, install the system, and configure its operation.